Optional Controllers

The HEATSTRIP® controller range consists of two (2) models designed to complement your heater in an indoor or outdoor application. The majority of the HEATSTRIP® heater range is supplied with a standard 10amp lead and plug, which you can simply “plug and go” in a normal domestic 10amp power point/GPO, without the need for an electrician. In this situation, you would turn the heater on & off via the power point and the heater would automatically operate at maximum temperature. In this situation, you do not have individual temperature control of the heater, as it will operate only at 100% capacity.

All HEATSTRIP® heaters can be hard-wired if required. For multiple heater installations (or for heaters above 10 amp) we would recommend hard wiring and the use of a controller. All hard wired heaters must be installed via a licenced electrician and all cabling selected according to the total amperage of the system.

We would recommend the use of a controller to:

  • Provide improved flexibility for your heating system
  • Maximise heating levels for your comfort
  • Ensure optimum performance
  • Reduce operating costs

Typical Applications – which controller?

  • Outdoor heating (eg. alfresco area): TT-MTM & TT-MTR-PLUG
  • Indoor heating for tough, open areas (eg. assembly line, warehouse etc): TT-MTM 
  • Indoor heating in a well insulated, enclosed area (office, classroom etc): TT-MTR-PLUG
  • If you need timer based control only for any indoor or outdoor application, use the TT-MTM & TT-MTR-PLUG

Controller Range
 

Outdoor & Indoor Application

 

 

 

 

 

 

 

 

 

             

 

  • DIY  (TT-MTR-PLUG)

 

TT-MTR-PLUG timer switch complements all HEATSTRIP® electric heaters in indoor or outdoor applications. It provides flexibility and ease DIY installation and remote control of plug-in heaters.

 

  •  Plug-in DIY timer switch

  •  On/Off function with LED indicators

  •  Automatic timer – 1 / 2 / 4 hour options

  •  Remote control included

  •  Ideal for HEATSRIP heaters and most plug-in appliances

  •  Max. 10 amps

  • 1 year warranty

 

  • HARDWIRED  (TT-MTM)

 

  • Simple On/Off function with LED indicators

  • 3 Heat settings - High / Medium / Low

  • Automatic timer control - 1/2/4 hour options

  • Includes a remote control (operational distance

  • Is approximate 8m in a straight line).

  • Suitable for operation of single or multiple heaters

  • Must be hard-wired. Max. 16 amps direct wired capacity

  • 1 year warranty

 

For multiple unit installations, we would recommend one heater (less than 16 amps) is direct wired to the controller and additional units wired via a relay/contactor.

 

Please refer to a licenced electrician for advice.

 

X